Direct service nodig? +31 (0) 544 – 76 90 09
Direct service nodig? +31 (0) 544 – 76 90 09
Dipperfox is the world's leading stump grinder. Simple, powerful, and practical to use, it impresses every professional with its performance. Stump removal has never been so fast, controlled, and quiet. Discover the major benefits of working with Dipperfox.
The Dipperfox removes stumps at tremendous speed. It takes just one minute to remove the entire stump of an average tree. Additionally, the Dipperfox can be operated at various speeds, allowing for precise and careful work.
The compact operating footprint ensures no damage to the surrounding area. Planters, fencing, paving, and vehicles remain undisturbed while a Dipperfox is at work nearby. Its refined drilling method creates no mess in the vicinity; the wood chips fall straight down and do not scatter in the wind.
Each Dipperfox requires only a limited working area, meaning the surrounding environment needs virtually no modification to get the job done. With a Dipperfox model available for every tree and setting, it is even possible to access the smallest back gardens.
The smooth, controlled motion with which the drill bores into the tree stump ensures there is no noise. It is perfectly possible to hold a conversation right next to a Dipperfox while it is operating. This guarantees that the immediate surroundings—including residential areas—will not be disturbed by noise.
Because the Dipperfox causes minimal damage to the soil, soil structure, and the site, it is possible to replant immediately and in the same spot.
The Dipperfox operates hydraulically and can be attached to either a fuel-powered or an electric machine. Thanks to its low operating speed, the carrier machine consumes very little fuel during use. This low speed also makes operating the Dipperfox highly ergonomic for the excavator operator. Using the Dipperfox prevents damage to the soil immediately surrounding the stump, which significantly boosts the success rate of replanting.
Dipperfox 400
Weighing just 195 kg and requiring 35 to 60 kW of engine power, the Dipperfox 400 is ideal for urban areas and sites with limited working space. Thanks to 13,000 Nm of torque at low speeds, this machine delivers powerful performance in a compact package.
Dipperfox 600
The Dipperfox 600 weighs 285 kg and requires an engine power of 35 to 83 kW. This model has been specially developed for operations in urban environments where larger excavators are difficult to deploy. It enables the quick and efficient removal of tree stumps.
Dipperfox 850 Pro
Weighing 575 kg and requiring a minimum engine power of 74 kW (100 hp), the Dipperfox 850 Pro is the most powerful model in the series. Its patented gear mechanism ensures optimal performance, allowing tree stumps to be removed within 20 to 120 seconds, depending on conditions.
| Model | Suitable for | Cutting diameter | Drilling depth | Hydraulic flow | Werkdruk |
|---|---|---|---|---|---|
| Dipperfox 400 | Excavators from 1.5 to 5 tonnes, loaders, and stand-on utility track loaders | 400 mm | 590 mm | 30 – 130 l/min | 110 – 250 bar |
| Dipperfox 600 | Excavators and tractors from 6 to 14 tonnes | 400 to 600 mm, depending on the blade used | 700 mm | 65 – 150 l/min | 220 – 250 bar |
| Dipperfox 850 Pro | Excavators from 14 to 30 tonnes | 850 mm | 900 mm | 110 – 220 l/min | 180 – 350 bar |
Vul hieronder het formulier in en wij nemen telefonisch contact met je op voor het inplannen van de afspraak.
