Aquamec Watermaster Classic IV

Watermaster Classic IV & V

From October 2017, Wellink can call itself an official dealer of Watermaster. All these machines are made for demanding applications in the field of environmental restoration, construction and maintenance. Watermasters are made and manufactured in Finland using the highest standard components, labor and production facilities. The factory is equipped with modern CNC machines and welding robots. Series production ensures consistent high quality, fast delivery times, complete documentation and simple service.
The difference between the IV and V is the motor and pump power.

Need more information?

Our sales team is happy to assist you!

+31 (0) 544 - 769009

Book an appointment

Sturdy hull for heavy duty amphibious use

Materials, strengths, stiffnesses and weights are well balanced for long hull life under heavy use

Divided into seven watertight compartments

Three corrosion-resistant paint layers outside and two inside

Two protective rails on the bottom for movement over the ground

Slip-resistant deck, handrails, lockable spacious tool box with maintenance tools on the right railing

Two pairs of side pontoons for extra stability (1 x 1 x 4.4 m)

Mast and signal lights for navigation and dredging

Dredging pump Classic IV

Engine power at 2100 revolutions per minute: 168 KW

Possibility of pumping 600m3 per hour

Dredging pump Classic V

Engine power at 2100 revolutions per minute: 205 KW

Possibility of pumping 900m3 per hour

Strong digging arm for operating heavy work tools

Strong, robust excavator arm specially designed for dredging, digging, piling, raking and hammering and also for walking on the ground with the Watermaster
Rotation/swivel angle 180 degrees. Covers a working area of 110 m
Mechanical quick coupling to connect attachments to the digging arm. Hydraulic quick couplings for attachments are made of stainless steel

Unique stabilizers for stable work in the water and running on dry land

Two hydraulically operated stabilizers at the front and two at the rear
Good grip on the ground. Fast and stable anchoring. Operator controls all stabilizer movements and anchoring from the cab
The front stabilizers have claws that are firmly attached to the bottom and prevent horizontal movement of the torso during operation

Own drive system to easily reach work locations

Cruising speed 4 knots
Hydraulically rotating propeller, operated from the cabin
Steering angle +- 40 degrees ensures a small turning circle and excellent navigation in tight places. The propeller goes up and down steplessly. At all heights the propeller remains in horizontal position

ES-TRIN certification

Watermater classic IV and V can be supplied with an ES-TRIN certificate at an additional cost.

Technical Specifications

Model Watermaster IV Watermaster V

Engine: 130 pk (96 kW) 150 pk (110 kW)

Weight: Ca. 7.000 kg Ca. 8.000 kg

Dimensions (L x W x H): 7,45 m x 2,54 m x 2,92 m 7,65 m x 2,75 m x 2,95 m

Speed on Water: 6 km/h 6 km/h

Speed on Land: Max. 10 km/h Max. 12 km/h

Draft: Approx. 45 cm (depending on load) Approx. 45 cm (depending on load)

Maximum Working Depth: Up to 6 meters (depending on implement) Up to 7 meters (depending on implement)

Visible working width: Up to 2.5 m Up to 3.0 m

Swing range: 360 degrees 360 degrees

Hydraulic pump: 180 l/min (max.) 250 l/min (max.)

Accessories: Various tools such as excavator arm, cutter bars, etc. Various tools such as excavator arm, cutter bars, etc.

Amphibious Capability: Works on both water and land Works on both water and land

Fuel Tank: 200 liters 250 liters

Transport Width: 2,54 m 2,75 m

Product details

Request Folder

Sales & advice

An offer after your appointment

Solution-oriented for your issue

Advisors with technical knowledge

+31 (0) 544 - 769009

Make an appointment

Watermaster Classic IV & V

Need more information?

Our sales team is happy to assist you!

Sturdy hull for heavy duty amphibious use

Strong digging arm for operating heavy work tools

Unique stabilizers for stable work in the water and running on dry land

Own drive system to easily reach work locations

ES-TRIN certification

Technical Specifications

Product details

Request Folder

Sales & advice

Model	Watermaster IV	Watermaster V
Engine:	130 pk (96 kW)	150 pk (110 kW)
Weight:	Ca. 7.000 kg	Ca. 8.000 kg
Dimensions (L x W x H):	7,45 m x 2,54 m x 2,92 m	7,65 m x 2,75 m x 2,95 m
Speed on Water:	6 km/h	6 km/h
Speed on Land:	Max. 10 km/h	Max. 12 km/h
Draft:	Approx. 45 cm (depending on load)	Approx. 45 cm (depending on load)
Maximum Working Depth:	Up to 6 meters (depending on implement)	Up to 7 meters (depending on implement)
Visible working width:	Up to 2.5 m	Up to 3.0 m
Swing range:	360 degrees	360 degrees
Hydraulic pump:	180 l/min (max.)	250 l/min (max.)
Accessories:	Various tools such as excavator arm, cutter bars, etc.	Various tools such as excavator arm, cutter bars, etc.
Amphibious Capability:	Works on both water and land	Works on both water and land
Fuel Tank:	200 liters	250 liters
Transport Width:	2,54 m	2,75 m

Watermaster Classic IV & V

Need more information?

Our sales team is happy to assist you!

Sturdy hull for heavy duty amphibious use

Strong digging arm for operating heavy work tools

Unique stabilizers for stable work in the water and running on dry land

Own drive system to easily reach work locations

ES-TRIN certification

Technical Specifications

Product details

Request Folder

Sales & advice

Bedankt dat je interesse hebt in ons

Folder aanvragen

Aquamec Watermaster Classic IV